come and take a look, here's some knowledge about shelves that you might not know

For places such as supermarkets, shopping malls, and warehouses, Xuzhou shelving is a very important storage equipment that plays a significant role in organizing and storing items. In the application of Xuzhou shelving, proper use and maintenance are essential to reduce damage and extend the service life of the shelving. So, what do you know about the correct usage methods and the details to pay attention to when using Xuzhou shelving? Below, Xuzhou Tianchen Shelving Manufacturing Factory will provide a detailed introduction for everyone:

1. Avoid Collisions with Handling Equipment

When handling goods, it is important to handle them gently to avoid collisions between the goods and the components of the shelving, especially for heavy-duty shelving. When operating with handling tools such as forklifts, one should drive straight in and out, and only turn after leaving the shelving area. If there is an accidental collision with components such as the uprights of heavy-duty shelving, it should be reported to the maintenance department immediately and a sign indicating "Shelving Component Damaged, Awaiting Repair" should be posted. The maintenance department will decide whether to repair it themselves or to notify the shelving manufacturer for after-sales replacement based on the extent of the damage: if the components of the heavy-duty shelving are only superficially damaged with no deformation of the metal material, the maintenance department can use the special coating repair spray paint reserved by Xuzhou Tianchen Shelving Manufacturing Co., Ltd. for touch-ups; if the components of the heavy-duty shelving are deformed, Xuzhou Tianchen Shelving Manufacturing Co., Ltd. should be notified immediately for replacement (24-hour service hotline: 133 9827 1980) to avoid collapse accidents.

2. The Stored Goods Must Not Exceed the Maximum Load Indicated on the Shelving's Load Capacity Sign

When designing heavy-duty shelving, the designer will confirm the weight of the products with the user, and then use the maximum load of the palletized goods multiplied by a safety factor of 1.4 to determine the load value as the design standard for manufacturing. After the installation of the shelving is completed, Xuzhou Tianchen Shelving Manufacturing Co., Ltd. will hang the "Shelving Usage Instructions and Operation Guide" in a conspicuous place, which includes usage details, shelving maintenance knowledge, and the maximum load capacity. When using these shelves, it is imperative not to exceed the specified load to prevent safety accidents.

3. Maintain Even Load Distribution

When storing goods on shelving, it is important to follow the principle of "light on top, heavy on the bottom." In simple terms, lighter items should be placed on the higher levels, while heavier items should be placed on the lower levels to prevent uneven load distribution and avoid safety accidents.

4. Pay Attention to Waterproofing and Moisture Prevention

Although the surface of the shelving is treated with electrostatic spray coating, it is still necessary to guard against moisture. If the shelving is found to be damp, it should be wiped clean with a cloth promptly. This is because metal shelving is prone to rust when damp, and wooden shelving is susceptible to rot under moist conditions.

The above content is shared by Xuzhou Tianchen Shelving Manufacturing Co., Ltd., a manufacturer of Xuzhou shelving, detailing the correct usage practices and maintenance knowledge for shelving. Proper use of Xuzhou shelving can reduce damage, extend the service life of the shelving, and thereby save expenses and reduce costs.